BY-J Blind Spot Monitoring System, 24GHz Millimeter Wave Radar Universal Car Blind Spot Detection System, Reversing Radar Parking System

Price: $138.00 - $118.00
(as of Nov 13, 2023 15:02:58 UTC – Details)

Product Description

The area invisible to the rearview mirror on both sides of the car is called the driving blind zone

It is easy to endanger driving safety. But after installing the BSM BSD millimeter wave in your car, as long as there is a moving object behind the car, the LED lights will flash regardless of day, night or snow.

Blind spot information systems are increasingly a “must-have” feature for large trucks and SUVs with long tail ends and poor rear visibility.

WARNING: Do not use the blind spot information system as a replacement for using the interior and exterior mirrors or looking over your shoulder before changing lanes. The blind spot information system is not a replacement for careful driving.

WARNING: The system may not operate properly during severe weather conditions, for example snow, ice, heavy rain and spray. Always drive with due care and attention. Failure to take care may result in a crash.

NOTE: The system does not prevent contact with other vehicles. It is not designed to detect parked vehicles, pedestrians, animals or other infrastructures.

NOTE: The system may not alert you if a vehicle quickly passes through the detection zone.

IMPORTANT: Can install on cars with a plastic bumper only, not work with vehicles with a metal bumper as metal bumper will interference with the radar sensor. This item fits for most DC12v sedan, compact, SUV, MPVs, pickup etc and professional audio installer installation is required.

Warning level introduction

Level 1 alarm

LED warning light yellow light is always on

Level 2 alarm

Open turn signal LED light flickers Didi sound alarm

Main components

2 millimeter wave radar probes,2 LED lights,1 buzzer,1 package of screw and tie-up,1 wires,1 Instructions,1 auxiliary card for installation,2 brackets.

BSD vehicle blind area monitoring system BSD blind spot monitoring system Parallel change Auxiliary Detection distance up to 10*40 ft Single lnput Single radar

Long range detection

The detection range is 12 meters. The sooner you get to know the back of the car, the better you can respond in a timely and safe manner

BSD blind spot monitoring system

When the A car is driving, the B car is seen from the rearview mirror, but the C car is not visible. If the A car changes to the left lane at this time, it is easy to collide with the C car!

Distinguish monitoring objects

Blind spot monitoring starts to work during driving. Blind spot monitoring can distinguish between fixed objects and moving objects. Fixed objects will not alarm

Installation instructions

Radar probe installation parameter requirements

Overall installation and wiring diagram

Wiring diagram

Product Dimensions ‏ : ‎ 9.45 x 6.7 x 3.94 inches; 2.05 Pounds
Date First Available ‏ : ‎ March 13, 2022
Manufacturer ‏ : ‎ BY-J
ASIN ‏ : ‎ B09VDLDZT8
Country of Origin ‏ : ‎ China

[Single Microwave Radar Sensor] High-speed frequency sensors for the left-rear and right-rear of the vehicle. The BSD system is activated with the turn signals, whenever there is a moving object pop into the rear of the vehicle, with the aid of LED lighting on, blinking, buzzer sound so that the driver can be cautious when lane changing to avoid the possibility of side crash accident.
[3 Major Functions] This Blind Spot Sensor integrates BSD-blind spot monitoring, LCA-parallel lane change assist, Dow -Open Door Warning (optional two doors) 3 functions to help detect the possible collision risk.
[Detecting Distance] The system uses a 24GHz millimeter-wave radar sensor chip, uses single transmit and four receive radar antennas, is equipped with sophisticated computer algorithms, and automotive-grade quality waterproof plugs, with a detection range of up to 12m, can monitor the closing objects in the neighbor lane within a range of 3.5m with speed gap over 0.5m/second.
[Normal Driving] When the car behind is slower than our speed, there is no danger of collision, and the blind spot monitoring does not give an alarm. When we overtake, the speed is faster than the car behind, and no alarm is given.
[Important Notes] This system integrates blind spot detection and reversing assistance.This item fits for most DC12v sedan, compact, SUV, MPVs, pickup etc, doesn’t suitable for vehiche with metal bumper, and professional installer installation is required.
This Radar Blind Spot System is an OEM-grade universal solution that will only function on vehicles with a soft rear fascia. This product cannot function through metal bumpers.