Dash Cam Hardwire Kit, Mini USB Port, DC 12V – 24V to 5V/2A Max Car Dash Camera Charger Cable kit with Fuse, Low Voltage Protection for Dash Cam (Mini USB and Fuse Kit)

Price: $17.53 - $15.59
(as of Dec 19, 2023 13:30:40 UTC – Details)

Product Description

Extra Advantage

Compatible with 12-24Vdc for car or truck installations.Perfect for 24/7 Parking Surveillance.Low voltage protection protects against battery dying.works for almost all car mini USB device, such as dash cam、mirror cam、GPS navigator and radar detector No need for cable from car cigarette lighter socket, replace it with a permanent hidden cableLess static when you’re listening to the radio. Installation in minutes with little to no expertise required.13ft/4 meter power cable included.The mini USB hardwire kit with built-in precise switching power supply module can transform 12V(24V) to 5V. The built-in safeguards protect your devices against overheating. Safety Notes

Pertorm the installation with the ignition in the OFF position.Do not strip any live wires.Correct electnical polarity and grounding is required for safe and proper installation.Only connect to a negative ground DC supply circuit.Not for installation to positive ground circuits.

Technical Details Connector: Mini USB Connector Input Voltage: DC 12V-24V Output Voltage: 5V Output Current: 2A Working Temperature:-40~ 160 Degree F Cable Length: 13ft/4m Low Voltage Protection: 11.4V for 12V vehicle; 23.5V for 24V vehicle.

24 Hours Parking Surveillance

A permanent live(un-switched) is only required when the camera is to be used when the vehicle is not in use, i.e. for surveillance purposes. 24hrs power to protect against theft when your car is in the parking lot.

Low Voltage Protection

Smart low voltage protection automatically shut off the power to your dash cam when the battery voltage drops to 11.4V(12V cars) or 23.5V(24V cars), thus preventing it draining the battery.

Great Package as A Gift

What’s Included: 1 x MiniUSB Hard wire Kit with User Manual. 1 x Mini/LP ACN Add-A-Circuit Fuse Holder 1 x Mini ACS Add-A-Circuit Fuse Holder 1 x ATO ACU Add-A-Circuit Fuse Holder

Insert the 2 fuse in the correct position

The supplied 5 Amp fuse MUST be placed in the uppermost socket, as shown above. In line with the red cable. The original fuse is to replaced in to the lower socket. Failure to do so will change the protection of the original circuit within the vehicle. Whilst this will not cause any damae to the vehicle,the lower 5 Amp fuse may above.

Installation Instruction

Installation – Step 1: Connect the supplied “fuse tap cable” to the vehicles fuse box.

Installation – Step 2: Installing the “Car Power Cable”.

2.1 Installation of the camera power cable needs careful planning for the cable run and the final position of the camera within the vehicle.

2.2 Starting from the camera end of the cable (with the mini USB) tuck the cable under the vehicle headlining, the “A” post trim and side panel trim until the cable exits towards the footwell.

For detals instruction preocess please refer to our user manual in the package. If in any doubt, please ask a vehicle technician prior for help.

The package come with 4 DUAL-SLOT fuse holder, mini, low profile mini, Standard ATO and micro2. 4 types, suit for most cars on the market
Low Voltage Protecting: With function of auto detect battery voltage and low voltage protecting, it can auto cut power output when it’s lower than 11.6V or 23.5V, compatible with large and small car, make sure the car can start normally
High Secure Standards: The mini USB hardwire kit with built-in precise switching power supply module can transform 12V(24V) to 5V. The built-in safeguards protect your devices against excessive current, overheating
Best Quality: .Also come with a installing manual for you as a refer